SharkRF IP Connector Client

../../_images/srfipc.png

You can use this connector to directly connect to another M1KE or openSPOT device, or a server which supports the SharkRF IP Connector protocol, or our open source SharkRF IP Connector Protocol Server.

Note

The easiest way is to use the Quick Setup menu on the device or the Quick Setup page on the web interface to connect to these servers.

The protocol’s documentation can be found on GitHub, so you can also develop your own application.

If you want to connect directly to another M1KE or openSPOT, make sure the another device is set up as the server, and the UDP port used by this connector (by default it’s 65100) is correctly set up on the server’s router (it’s open on the firewall and is forwarded to the server on its local network).