FCS connector

You can use this connector to connect to a network which supports the FCS protocol like the FCS network.

Note

The easiest way is to use the Quick Setup menu on the device or the Quick Setup page on the web interface to set up this connector.

Advanced settings

If Advanced mode is enabled, and you enter IDs into the DGID list, then they will be sent to the server. The server will link the specified DGIDs/rooms if it supports this functionality. Note that the server may override the Room number setting if the DGID list is not empty.

You can enable transmitting in VW (Voice Wide) mode, but we recommend using DN (Digital Narrow) mode instead, as it is more resilient to bit errors at the remote end and it also lets the listener see the caller information even when the call header is missed.