DCS/XLX connector

../../_images/dcsxlx.png

You can use this connector to connect to a network which supports the DCS protocol like DCS or XLX.

Note

The easiest way is to use the Quick Setup menu on the device or the Quick Setup page on the web interface to set up this connector.

Note

DCS and XLX servers usually do not need a valid D-STAR® registration, but you can check your callsign’s registration by clicking on the Check D-STAR® registration button at the Owner information on the Quick Setup page.

Advanced settings

If Advanced mode mode is enabled, and the Auto set URCALL to network setting is enabled, then the destination callsign of outgoing calls will be automatically set to CQCQCQ.