SharkRF IP Connector Client connector

You can use this connector to directly connect to another openSPOT device, or a server which supports the SharkRF IP Connector protocol, or our open source SharkRF IP Connector Protocol Server. The protocol's documentation can be found on GitHub, so you can also develop your own application for the openSPOT3.

The easiest way is to use the Quick setup to connect to a SharkRF IP Connector server.

If you want to connect directly to another openSPOT or openSPOT3, make sure that the another device is set up as the server, and the UDP port used by this connector (by default it's 65100) is correctly set up on the server's router (it's open on the firewall and is forwarded to the server openSPOT1/2/3 on its local network).

All modem modes are supported by this connector, with automatic cross mode conversion between the following modes:

  • DMR, D-STAR®, C4FM (DN mode) and NXDN®.
  • C4FM (VW mode) and P25.

results matching ""

    No results matching ""