Connector specific menu items

Broadcast Neighbors

Note

This menu item is only shown if the Broadcast is active.

This option lets you see the list of detected neighbors and send messages to them.

Quick Call

Note

This menu item is only shown if the Homebrew/MMDVM® connector is active.

The Quick call list lets you quickly call ID 4000 with a group or private call, or an ID which is saved to the device’s quick call memory. You can edit this list using the device display or at the Quick Call section of the web interface.

If the Auto group call 4000 checkbox is checked, then the device will automatically start a quick call to TG4000 to make the server unlink everything before quick calling the desired ID.

Learn more about talkgroup linking/unlinking here.

Quick Call Favs

Note

This menu item is only shown if the Homebrew/MMDVM® connector is active.

The Quick call favs list lets you quickly call an ID which is saved to the device’s favorite PTT destinations. You can edit this list using the device display on the PTT Destination Settings screen, or on the web interface’s Mic settings page.

IAX2/AllStarLink®

Note

This menu item is only shown if the IAX2/AllStarLink® connector is active.

Show ASL linked nodes

This menu item is only shown if the device is connected to a server in AllStarLink® mode. The list shows linked nodes reported by the AllStarLink® server.

../_images/screen-mainmenu-iax2-aslnodes.png

You can find this list also on the Status page on the web interface.

Hang up call

This menu item is only shown if there is an ongoing call in IAX2 mode. It lets you hang up the call.

Call

This menu item is only shown in IAX2 mode. It lets you call other IAX2 devices by entering their numbers. You can save and recall numbers using the Saved entries menu item.

Note

If you want to use non-digit characters as part of the number, save an entry on the web interface’s Call dialog.

DTMF

This menu item is only shown while a call is active. It lets you send DTMF digits. You can save and recall DTMF digits using the Saved entries menu item.

See the list of commands supported by AllStarLink® servers here. Note that not all commands are enabled on all servers.