Call

The call dialog is available when the IAX2/AllStarLink® connector is active.

Calling a number

The call button is only enabled when the IAX2/AllStarLink® connector is in IAX2 mode.

The DTMF send button is enabled when the IAX2/AllStarLink® connector is in AllStarLink® mode or there is an ongoing call in IAX2 mode.

See the list of commands supported by AllStarLink® servers here.

Note

Not all commands are enabled on all servers.

You can save and recall numbers and DTMF sequences and export/import them to/from files.

Important

Saved numbers and DTMF sequences are stored in the global storage which are common for all configuration profiles.

Note

Voice of incoming calls may stutter while the import operation is ongoing.