Charging the battery

Connect the M1KE to a USB power supply to start charging the battery. The M1KE is fully functional while it is charging. The Charge LED next to the USB connector at the bottom of the device is only lit while the device is charging.

Warning

Make sure you use a USB charger which can supply enough current while the M1KE is turned on (min. 1500mA), otherwise the battery may not charge or deplete while the device is turned on.

Powering up

Press and hold the Power/Back Button for 1-2 seconds.

Important

If you’re powering up a brand new M1KE which has never been turned on before, then connect it to a USB power supply first; otherwise it will not turn on.

Note

The status LED may blink green for a few seconds when turning on the M1KE for the first time.