Connecting to a Wi-Fi® network

This page gives you a quick guide on how to connect to a Wi-Fi® network after the Initialization Setup has been completed.

Using the device display

  1. Open the Wi-Fi® connect screen under Main Menu / Settings.

  2. Select the network to connect

  3. Enter the password if required

Using AP (Access Point) mode

  1. Enable AP mode on the Wi-Fi® screen under Main Menu / Settings

  2. The device starts broadcasting its own Wi-Fi® network called M1KE AP. Connect to this network using your phone, tablet or computer.

  3. The initialization setup web page should automatically show up after your phone/tablet/computer is connected. If not, open a web browser and open http://192.168.99.1/

    Note

    This IP address is only active while AP mode is enabled on the M1KE and your phone/tablet/computer is connected to its Wi-Fi® network.

  4. Complete the steps on the initialization setup web page

Using the web interface

  1. Go to the Wireless settings on the Network page

  2. Edit the list of networks, and/or use the Wireless scan feature

See this page for information about setting up both home and phone Wi-Fi® connections.